跳转到主内容

将 IO 卡从 40 Gb NIC 更改为 32 Gb FC HBA 后, FAS9000 紧急关闭

Views:
2
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS9000
  • AFF-A700

问题描述

  • 关闭节点,将插槽 1 中的 40 Gb NIC 更换为 32 Gb FC HBA 。接通电源后, ONTAP 会提示机箱温度过高,然后紧急关闭节点。

Dec 29 11:53:00 [node-02:monitor.globalStatus.critical:EMERGENCY]: Chassis temperature is too high..
Dec 29 11:55:19 [node-02:monitor.shutdown.chassisOverTemp:EMERGENCY]: Chassis temperature is too hot: Temp on I/O Slot1 is critical high. System will be shutdown in 2 minutes
Dec 29 11:57:19 [node-02:monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Environmental Reason Shutdown (Temperature critical)
Terminated
.
Uptime: 16m57s
System powering down...

  • 重新启动节点,错误消失。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.