跳转到主内容

收到FAS9300 NodeIfInErrorsWarnAlert

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009633199</a>
Last Updated:

适用场景

  • FAS8300
  • ONTAP 9
  • Cisco Nexus 3132 Q-V

问题描述

  • NodeIfInErrorsWarnAlert 带有和的集群警报将显示在EMS日志文件中
[vifmgr: vifmgr.cluscheck.ctdpktloss:alert]: Continued packet loss when pinging from cluster lif lif-name (node01) to cluster lif lif-name (node02).
 
Call home for CLUSTER NETWORK DEGRADED: Large MTU Packet Loss - Ping failures detected between Cluster01 (IP ADD) on Node01 and Cluster02 (IP ADD) on Node02
 
  •  在system-Health警报.XML中也可以看到以下情况

The percentage of inbound packet errors of node "Node01" on interface "xxx" is above the warning threshold.
 

  • 查看集群端口和交换机日志以确定已连接的端口。

CLUSTER01::> network port show
Node: NODE01
                      Speed(Mbps)     Health
Port    IPspace    Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- ---------
xxx    Default    Default      up  9000  auto/-    healthy

  • 交换机日志显示交换机端MTU大小设置不正确
Ethernetx/x is up
admin state is up, Dedicated Interface
  Hardware: 40000 Ethernet, address: xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)
 MTU 1500 bytes, BW 40000000 Kbit , DLY 10 usec

 

  • ifstat -z 受影响节点上运行检查相关端口是否显示较高的CRC错误。

-- interface  xxx  
RECEIVE
Total frames:    468m | Frames/second:    227  | Total bytes:     114g
Bytes/second:   55454  | Total errors:    556k | Errors/minute:    16
Total discards:    0  | Discards/minute:    0  | Multi/broadcast:  2369k
Non-primary u/c:    0  | Errored frames:    0  | Unsupported Op:    0
CRC errors:     556k | Runt frames:      0  | Fragment:       0

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device
  • 这篇文章对您有帮助吗?