跳转到主内容

在ONTAP中禁用BMC的IPv4/IPv6 IP无法正常工作并显示错误

Views:
25
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

适用场景

  • AFF A400
  • FAS 8700
  • FAS 8300
  • FAS 2820

问题描述

从ONTAP禁用BMC的IPv4/IPv6不起作用、并显示错误以启用IPv6/IPv4、即使已同时启用IPv4和IPv6也是如此。

::> sp network modify -node node1 -address-family IPv4 -enable false

Error: command failed: IPv4 address can be disabled only if IPv6 address is enabled.

::> sp network modify -node node1 -address-family IPv6 -enable false

Error: command failed: IPv6 address can be disabled only if IPv4 address is enabled.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.