跳转到主内容

在 FAS9000 上启动期间, DIMM 映射并显示错误 0x30 和 AFF A700

Views:
35
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

  • BIOS 为 10.4 或更早版本的 AFF A700
  • BIOS 为 10.4 或更早版本的 FAS 9000

问题

  • 重新启动后,系统无法启动,并显示错误 DIMM:x mapped out代码。 0x30
  • 错误:

System DIMM configuration is not supported by AFF-A700
Halting...

BIOS Version: 10.4
Portions Copyright (C) 2014-2017 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Cold Boot required for Memory Initialization.
System is resetting.

Initializing System Memory ...
DIMM:5 mapped out. BIOS MRC HW R/W test error. Major / Minor Error Code: 0x30 / 0x1C
Complete channel mapped out.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device