跳转到主内容

是否可以使用 Cisco QSFP-4SFP10G-CU 40GbE 到 10GbE 分支缆线将 NetApp 控制器连接到 Cisco 40GbE 数据交换机？

  1. 最后更新
  2. 另存为PDF
Views:
5
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS/AFF 系统
  • Cisco 交换机

问题解答

客户可能需要使用 Cisco 铜缆 4x10GbE 分支电缆将其 Cisco 40GbE 以太网交换机端口连接到 NetApp FAS 平台板载或可选 NIC 。

有关缆线兼容性信息的权威来源是 NetApp Hardware Universe。NetApp 部件号 X66120-3 或 X66120-5 可用作交叉参考。

QSFP+ 到 4xSFP+ 铜缆分支缆线的 Cisco 部件号：

  • QSFP-4SFP10G-CU/1M
  • QSFP-4SFP10G-CU/3M （ NetApp 部件号： X66120-3 ）
  • QSFP-4SFP10G-CU/5M （ NetApp 部件号： X66120-5 ）

追加信息

附加信息 _text

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.