更换主板后、PCM无法启动、并显示消息The incorrect NVMEM batterY is installed

最后更新
另存为PDF

Views:: 19

Visibility:: Public

Votes:: 0

Category:: fas-systems<a>NVMEM电池</a><a>FSE</a><a>271-00045</a><a>FCC</a>

Specialty:: hw

Last Updated:

适用场景

AFF A400、C400、FAS9300、FAS4700
- 和BMC固件< 11.5P1、11、6
AFF C190、AFF A220、FAS2720、FAS2750
- 和BMC固件< 13.3

问题描述

更换主板(PCM)后的型号在适用场景部分中、启动期间出现以下错误：

Apr 27 08:31:18 [Node1:nvmem.battery.unread:EMERGENCY]: The NVMEM battery state cannot be determined because the 'Bat Initial FCC' sensor is unreadable. To prevent data loss, the system will shut down in 5 minutes. Apr 27 08:31:18 Power outage protection flash de-staging: 28 cycles WARNING: The battery is unfit to retain data during a power outage. This is likely because the battery is discharged but could be due to other temporary conditions. When the battery is ready, the boot process will complete and services will be engaged. To override this delay, press 'c' followed by 'Enter' Apr 27 08:32:18 [Node1:callhome.battery.failure:EMERGENCY]: Call home for BATTERY ('Bat Initial FCC' unreadable) CRITICAL. Apr 27 08:32:19 [Node1:nvmem.battery.packInvalid:EMERGENCY]: The incorrect NVMEM battery is installed. Expected part number is 271-00045. To prevent data loss, the system will shut down in 5 minutes. Apr 27 08:32:49 [Node1:callhome.battery.failure:EMERGENCY]: Call home for BATTERY (invalid pack) CRITICAL. Apr 27 08:33:21 Power outage protection flash de-staging: 30 cycles ^CApr 27 08:35:23 Power outage protection flash de-staging: 31 cycles Apr 27 08:37:25 Power outage protection flash de-staging: 32 cycles Apr 27 08:39:27 Power outage protection flash de-staging: 33 cycles Apr 27 08:41:29 Power outage protection flash de-staging: 34 cycles **************************** * Power Fail - Please Wait * ****************************

然后、此节点将继续关闭。