跳转到主内容

AFF A250无法启动、并等待预留清除

Views:
6
Visibility:
Public
Votes:
0
Category:
aff-series<a>用于</a><a>翻译</a><a>的2009-148427 </a>
Specialty:
hw
Last Updated:

适用场景

  • AFF A250
  • ONTAP 9
  • 无交换机集群网络 

问题描述

  • 一个节点无法重复启动:
Press Esc-T or Ctrl-D to exit
Waiting for reservations to clear
Waiting for reservations to clear
Waiting for reservations to clear
...
  • 配对节点中的HA互连链路已启动、但IC RDMA已关闭:

::> set advanced
::*> system ha interconnect status show
                       Node: node_name
              Link 0 Status: up
              Link 1 Status: up
           Is Link 0 Active: true
           Is Link 1 Active: true
         IC RDMA Connection: down

  • 两个节点中的集群端口均已启动:

*> sysconfig -v
...
slot 0: 25G Ethernet Controller CX5
    e0c MAC Address:    XX:XX:XX:XX:XX:XX (auto-25g_cr-fd-up)
        SFP Vendor:         Amphenol
        SFP Part Number:    NDCCGF-N103
        SFP Serial Number:  XXXXXXXXXXXXXX
    e0d MAC Address:    XX:XX:XX:XX:XX:XX (auto-25g_cr-fd-up)
        SFP Vendor:         Amphenol
        SFP Part Number:    NDCCGF-N103
        SFP Serial Number:  XXXXXXXXXXXXXX

  • 两个节点均已禁用存储故障转移:

[node_name: statd: cf.takeover.disabled:alert]: HA mode, but takeover of partner is disabled due to reason : HA interconnect error. Verify that the partner node is running and that the HA interconnect cabling is correct, if applicable. For further assistance, contact technical support.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.