ONTAP 上的跟踪路由的默认UDP端口范围是多少？

最后更新
另存为PDF

Views:: 6

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: nas

Last Updated:

适用场景

ONTAP 9

问题解答

33435~33626

追加信息

在实验室上检查端口范围。

开始 tcpdump收集日志。
::> network tcpdump start -node node-01 -port e0c

Info: Started tcpdump packet trace on interface "e0c"
从 traceroute ONTAP的默认设置开始、该设置具有64个跃点 、每个跃点具有 三个UDP发送。
::> traceroute -node node-01 -destination 10.2.2.2

traceroute to 10.2.2.2 (10.2.2.2), 64 hops max, 40 byte packets

1 10.128.231.1 (10.128.231.1) 0.491 ms 0.316 ms 0.309 ms

2 10.129.79.221 (10.129.79.221) 0.448 ms 0.670 ms 0.439 ms

3 10.129.77.193 (10.129.77.193) 1.016 ms 1.357 ms

10.129.77.194 (10.129.77.194) 0.857 ms

4 10.133.128.106 (10.133.128.106) 121.045 ms 131.110 ms

202.3.124.7 (202.3.124.7) 56.697 ms

5 * * *

6 * * *

7 * * *

......snipped

62 * * *

63 * * *

64 * * *
停止tcpdump日志收集。
::> network tcpdump stop -node node-01 -port e0c

Info: Stopped tcpdump packet trace on interface "e0c"
通过收集 tcpdumphttp(s)://<CLUSTER_MGMT_IP>/spi/<NODE_NAME>/etc/log/packet_traces/。
验证目标端口范围是否为33435~33626。
4180.0173752022-09-01 18:47:14.86340910.128.231.1605244110.2.2.233435UDP6252441 → 33435 Len=20

4260.0002502022-09-01 18:47:14.86735710.128.231.1605244110.2.2.233436UDP6252441 → 33436 Len=20

4280.0001122022-09-01 18:47:14.86766910.128.231.1605244110.2.2.233437UDP6252441 → 33437 Len=20

・・・・

77740.1051422022-09-01 19:02:09.40947710.128.231.1605244110.2.2.233625UDP6252441 → 33625 Len=20

78370.2483902022-09-01 19:02:14.42025510.128.231.1605244110.2.2.233626UDP6252441 → 33626 Len=20