在更换控制器期间、无法从节点中删除VLAN和ifgrp配置
- Views:
- 3
- Visibility:
- Public
- Votes:
- 0
- Category:
- ontap-9
- Specialty:
- network<a>2008687944</a><a>翻译</a>
- Last Updated:
适用场景
ONTAP 9
AFF-A300
问题描述
system controller replace在双节点集群中执行将node01 (AF-A300)更换为新的AF-A400控制器的操作时、客户无法删除node01上的VLAN和接口组(ifgrp)配置。 这导致操作暂停、无法恢复：
示例：
::*> system controller replace resume
Error: VLAN present on node . Remove and resume again.
command failed: Operation is not in proper state to resume.
- 当客户尝试删除VLAN配置时、命令失败并显示以下错误：
示例：
Error: command failed: Cannot remove port that is a failover target for a LIF. To list LIFs containing a failover target, use the "network interface show -failover-targets <targetname>" command.