跳转到主内容

由于LACPDU未增加、LACP无法正常工作

Views:
2
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas<a>2009574721.</a>
Last Updated:

适用场景

  • ONTAP 9.3及更高版本
  • 多模式LACP

问题描述

  • 物理端口已启动、但IFGRP已关闭。

ifgrp down.png

  • IFRP显示两个端口均已关闭、例如:
Cluster::> network port ifgrp show
Port    Distribution              Active
Node   ifgrp   Function    MAC Address    Ports  Ports
------  -------  ------------ --------------   ------- ---------------
node0   a0a    ip       02:a0:98:11:22:33 none  e0c
  • LACPDU不递增

注意:此计数器是在 ifconfig -v ONTAP 9.3中添加到的

::> system node run -node <node> -command ifconfig -v

a0a: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
options=6407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 02:a0:98:11:22:33
media: Ethernet autoselect
status: active
groups: lagg
laggproto lacp lagghash l3
lagg options:
flags=11<USE_FLOWID,LACP_STRICT>
flowid_shift: 16
lagg statistics:
active ports: 0 <-- No ports active in the ifgrp
flapping: 0
lag id: [(8000,02-A0-98-11-22-33,0032,0000,0000),
(8000,AA-BB-CC-DD-EE-FF,0037,0000,0000)]
laggport: e0d flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> state=3d<ACTIVITY,AGGREGATION,SYNC,COLLECTING,DISTRIBUTING>
[(8000,02-A0-98-11-22-33,0032,8000,0006),
(8000,AA-BB-CC-DD-EE-FF,0037,8000,00B9)]
input/output LACPDUs: 0 / 14099<--- LACPDU count, this should increment over time
laggport: e0c flags=18<COLLECTING,DISTRIBUTING> state=3d<ACTIVITY,AGGREGATION,SYNC,COLLECTING,DISTRIBUTING>
[(8000,02-A0-98-11-22-33,0032,8000,0007),
(8000,AA-BB-CC-DD-EE-FF,0037,8000,043A)]
input/output LACPDUs: 0 / 14099<--- LACPDU count, this should increment over time
状态信息

  • 等待2分钟、然后再次运行它、以验证LACPDU是否增加

a0a: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
options=6407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 02:a0:98:11:22:33
media: Ethernet autoselect
status: active
groups: lagg
laggproto lacp lagghash l3
lagg options:
flags=11<USE_FLOWID,LACP_STRICT>
flowid_shift: 16
lagg statistics:
active ports: 0 <-- No ports active in the ifgrp
flapping: 0
lag id: [(8000,02-A0-98-11-22-33,0032,0000,0000),
(8000,AA-BB-CC-DD-EE-FF,0037,0000,0000)]
laggport: e0d flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> state=3d<ACTIVITY,AGGREGATION,SYNC,COLLECTING,DISTRIBUTING>
[(8000,02-A0-98-11-22-33,0032,8000,0006),
(8000,AA-BB-CC-DD-EE-FF,0037,8000,00B9)]
input/output LACPDUs: 0 / 14539<--- LACPDU count, this should increment over time
laggport: e0c flags=18<COLLECTING,DISTRIBUTING> state=3d<ACTIVITY,AGGREGATION,SYNC,COLLECTING,DISTRIBUTING>
[(8000,02-A0-98-11-22-33,0032,8000,0007),
(8000,AA-BB-CC-DD-EE-FF,0037,8000,043A)]
input/output LACPDUs: 0 /14539<--- LACPDU count, this should increment over time

Sun Nov 12 11:37:16 -0800 [node-01: intr: netif.linkDown:info]: Ethernet a0a: Link down, check cable.
Sun Nov 12 11:37:16 -0800 [node-01: intr: netif.linkDown:info]: Ethernet a0a-1x4: Link down, check cable.
Sun Nov 12 11:37:16 -0800 [node-01: intr: netif.linkDown:info]: Ethernet a0a-1x7: Link down, check cable.
Sun Nov 12 11:37:16 -0800 [node-01: intr: netif.linkDown:info]: Ethernet a0a-1x9: Link down, check cable.
Sun Nov 12 11:37:16 -0800 [node-01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node-01, port a0a.
Sun Nov 12 11:37:16 -0800 [node-01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node-01, port a0a-1x4.
Sun Nov 12 11:37:16 -0800 [node-01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node-01, port a0a-1x7.
Sun Nov 12 11:37:16 -0800 [node-01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node-01, port a0a-1x9.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.