跳转到主内容

使用 40G 端口的 LACP ifgrp 在之后无法发送流量 升级到 ONTAP 9.8

Views:
11
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
network
Last Updated:

适用于

  • ONTAP 9.8
  • LACP ifgrp
  • 40 GbE 成员端口,介质类型包含 "40g_lm4"

问题

  • LACP ifgrp 无法在升级到后发送流量 ONTAP 9.8
  • 这仅适用于使用 40 GbE 成员端口的 LACP ifgrp 远程多模式收发器 
    • 成员端口的介质类型将包含字符串 "40g_lm4"
    •  ::> node run -node <node> sysconfig -a (truncated...) slot 1: 10/40 Gigabit Ethernet Controller XL710 QSFP+ e1a MAC Address: aa:bb:cc:dd:ee:fe (auto-40g_lm4-fd-up) QSFP Vendor: CISCO-AVAGO QSFP Part Number: AFBR-79EBPZ-CS2 QSFP Serial Number: AVF87654321 e1e MAC Address: aa:bb:cc:dd:ee:ff (auto-40g_lm4-fd-up) QSFP Vendor: CISCO-AVAGO QSFP Part Number: AFBR-79EBPZ-CS2 QSFP Serial Number: AVF12345678 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device