跳转到主内容

This Site will be down for up to 3 hours on December 2, 2023 from 8 PM - 11 PM PST, to deploy an infrastructure update.

在将交换机从 Cisco 更换为 H3C 后,接口组不起作用

Views:
22
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
network
Last Updated:

适用场景

  • ONTAP 9
  • H3C
  • 接口组( ifgrp )

问题描述

  • 网络交换机将从 Cisco 更改为 H3C 。
  • 此时 ifgrp 在 NetApp 存储端不起作用。
  • ifgrp 状态显示已中断。端口状态为 lag_inactive 。

default: transmit 'IP Load balancing', Ifgrp Type 'multi_mode', fail 'log'
a0a: 0 links, transmit 'IP+port Load balancing', Ifgrp Type 'lacp' fail 'default'
     Ifgrp Status     Broke   Addr_set 
     lag_inactive:
     e0c: state lag_inactive, since 01May2021 23:19:39 (00:13:43)
      mediatype: auto-1000t-fd-up
      flags: lacp enabled
      input packets 130, input bytes 14468
      input lacp packets 0, output lacp packets 976
      output packets 975, output bytes 120900
      up indications 2, broken indications 1
      drops (if) 0, drops (link) 0
      indication: lag_inactive at 01May2017 15:19:39
      consecutive 0, transitions 3
     e0d: state lag_inactive, since 01May2021 23:19:33 (00:13:49)
       mediatype: auto-1000t-fd-up
      flags: lacp enabled
      input packets 132, input bytes 15152
      input lacp packets 0, output lacp packets 977
      output packets 976, output bytes 121024
      up indications 2, broken indications 1
      drops (if) 0, drops (link) 0
      indication: lag_inactive at 01May2021 23:19:33
      consecutive 0, transitions 3

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device