跳转到主内容

事件日志显示错误 NETIF.LinkErrors

Views:
35
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

状态信息

适用场景

  • ONTAP 9.9
  • ONTAP 9.8
  • ONTAP 9.7
  • ONTAP 9.6
  • ONTAP 9.3

问题描述

  • EMS日志每小时报告一次以下错误:

[cluster1-01: intr: netif.linkErrors:error]: Excessive link errors on network interface x. Might indicate a bad cable, switch port, or NIC, or that a cable connector is not fully inserted in a socket. On a 10/100 port, might indicate a duplex mismatch.

  • 可以 为不同的端口和节点报告此情况。
  • Ifstat输出还会显示增加的同步总错误和CRC错误:

示例:

-- interface  e0b  (3 days, 2 hours, 26 minutes, 34 seconds) --
 RECEIVE
 Total frames:    1529m  | Frames/second:   5707  | Total bytes:    13273g
 Bytes/second:   49528k  | Total errors:   24795  | Errors/minute:     6
  Total discards:    0  | Discards/minute:    0  | Multi/broadcast: 64771
  Non-primary u/c:    0  | CRC errors:    24795 | Runt frames:      0
  Fragment:       0  | Long frames:      0  | Jabber:        0
  Length errors:    0  | No buffer:       0  | Xon:          0

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.