集群交换机运行状况监控器在 9.8 及更高版本中报告 "SNMP 设置无效 "

最后更新
另存为PDF

Views:: 52

Visibility:: Public

Votes:: 0

Category:: fabric-interconnect-and-management-switches<a>2009073495</a>

Specialty:: hw

Last Updated:

适用场景

集群网络交换机
ONTAP 9.8

问题描述

在ONTAP 9.8及更高版本中、尝试使用命令"system cluster-switch cree"或"system switch Ethernet cree"创建集群交换机条目失败、并显示以下错误消息：

::> set advanced ::*> system switch ethernet create -device switch1 -address 10.10.10.1 -model OTHER -type cluster-network -is-monitoring-enabled-admin true Error: SNMP validation request timed out. Verify that the "-community-or-username" value is valid.

"system cluster-switch show"命令输出的"reason"字段的值为"Invalid SNMP Settings"

::> system cluster-switch show -type cluster-network

Switch Type Address Model

--------------------------- ------------------ ---------------- ---------------

switch1 cluster-network 10.10.10.1 N9K-C9336C-FX2

Serial Number: XXXXXXXX

Is Monitored: false

Reason: Invalid SNMP Settings

Software Version: Cisco Nexus Operating System (NX-OS) Software, Version

9.3(8)

Version Source: CDP/ISDP

ONTAP与交换机之间没有网络连接问题