跳转到主内容

磁盘状况不正常会影响性能

Views:
39
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
perf<a>性能</a><a>磁盘延迟</a><a>出现故障前</a><a>2008678245</a>
Last Updated:

适用场景

  • ONTAP 9
  • ONTAP 8.
  • FAS
  • AFF

问题描述

  • 观察到高FlexVol延迟。
  • 在某些情况下、高延迟可能会导致NFS断开连接。
  • 运行 qos statistics volume latency show 命令会在 disk 列下显示主要延迟。
  • 单个 驱动器的 利用率和延迟明显高于RAID组中的其他驱动器
    • 可以使用node shell statit 命令对此进行验证
cluster1::> node run -node local -command "priv set -q advanced; statit -e" ... disk ut% xfers ureads--chain-usecs writes--chain-usecs cpreads-chain-usecs greads--chain-usecs gwrites-chain-usecs /aggr1/plex0/rg0: 0a.10.10 31 93.15 0.00 .... . 54.89 26.94 590 38.26 38.85 155 0.00 .... . 0.00 .... . 0a.10.1 33 93.98 0.00 .... . 55.75 26.55 630 38.23 38.83 183 0.00 .... . 0.00 .... . 0a.10.2 19 118.78 9.53 3.50 8515 56.77 10.57 291 52.49 9.60 543 0.00 .... . 0.00 .... . 0a.10.3 21 120.65 10.11 3.80 8440 58.10 10.88 362 52.43 9.50 566 0.00 .... . 0.00 .... . 0a.10.4 20 119.76 9.21 3.27 9108 57.79 10.54 314 52.76 9.44 552 0.00 .... . 0.00 .... . 0a.10.5 100 121.62 10.52 3.22 19375 58.78 10.20 7699 52.32 9.79 4831 0.00 .... . 0.00 .... . 0a.10.6 18 119.96 9.57 3.33 8727 57.97 10.73 216 52.42 9.64 541 0.00 .... . 0.00 .... . 0a.10.7 18 119.06 9.01 3.53 8786 57.71 10.57 223 52.34 9.56 535 0.00 .... . 0.00 .... . 0a.10.8 18 121.28 9.75 3.76 8179 59.29 10.89 235 52.24 9.72 544 0.00 .... . 0.00 .... . 0a.10.9 19 121.30 10.90 3.47 8249 58.15 11.07 217 52.26 9.87 526 0.00 .... . 0.00 .... .
  • EMS日志可能会在将磁盘标记为故障之前报告多个错误并在磁盘上发生中断。
scsi_cmdblk_strthr_admin: scsi.cmd.retrySuccess:debug]: Disk device 3b.51.1L2: request successful after retry #1/#0: cdb 0x28:3b468100:0008 (24080). scsi_cmdblk_strthr_admin: scsi.cmd.retrySuccess:debug]: Disk device 3b.51.1L2: request successful after retry #1/#0: cdb 0x28:3b4681a8:0008 (24081). scsi_cmdblk_strthr_admin: scsi.cmd.retrySuccess:debug]: Disk device 3b.51.1L2: request successful after retry #1/#0: cdb 0x88:000000020ab11b00:00000008 (24928). scsi_cmdblk_strthr_admin: scsi.cmd.retrySuccess:debug]: Disk device 3b.51.1L2: request successful after retry #1/#0: cdb 0x88:00000002b7ff0d00:00000038 (24619). config_thread: raid.disk.delete.drl:debug]: aggregate Disk /aggr01_node02/plex0/rg0/3b.51.1L1 Shelf 51 Bay 1 [NETAPP X481_SMKRE06TSDB NA03] S/N [S4D12BT0] UID [5000C500:8CE40C44:00000000:00000000:00000000:00000000:00000000: 00000000:00000000:00000000] Deleting dirty region log DRL_1. wafl.cp.toolong:error]: Aggregate fas_01_DATA_AGGR experienced a long CP...

wafl_exempt08: wafl.cp.toolong:error]: Aggregate fas_01_DATA_AGGR experienced a long CP.

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.