跳转到主内容

「acp.command.connect" message」とは何を意味しますか?

Views:
29
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

環境

  • ONTAP 9.1P20

回答

  • acp.command.connectメッセージは、Alternate Control Path(ACP)で接続問題が検出されたことを示します。

例:

[xxx@xxx:acp.command.connect:debug]: Could not establish connection with 192.168.1.115

対処方法は、ACP接続を確認することです。

  • このメッセージはデバッグレベルで報告され、SASデータ転送には影響しません。
  • を使用しているモジュールを確認するには <IP_address of ACP>storage shelf acp module show -instanceコマンドを実行します。

例:

Culster::> storage shelf acp module show -instance

                        Node: fas8080-dal-1
                 Module Name: 1.2.B
                Adapter Name: 0b
                 MAC Address: 00:a0:98:20:51:72
                    IOM Type: iom6
         Shelf Serial Number: 9401812119
                  IP Address: 192.168.1.115
            Protocol Version: 1.2.02.10
            Firmware Version: 02.10
                 Assigner ID: 536940649
                       State: active
                Last Contact: 556
           Power Cycle Count: 0
             Power Off Count: 0
              Power On Count: 0
        Expander Reset Count: 0
  Expander Power Cycle Count: 0

  • このメッセージは、storage shelf acp configure -is-enabled falseコマンドを実行してACPを無効にすることで抑制できます。

のデフォルト値-is-enabledはです true

追加情報

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.