跳转到主内容

集群模式 Data ONTAP 使用什么 LIF 角色来建立与远程服务器的连接?

Views:
25
Visibility:
Public
Votes:
0
Category:
data-ontap-8
Specialty:
core
Last Updated:

可不使用  

适用于

集群模式 Data ONTAP 8
集群模式 Data ONTAP 8.3
集群模式 Data ONTAP 8.2
集群模式 Data ONTAP 8.1

解答

如果这会影响您的系统

、请检查 Active IQ Data ONTAP 服务可能会从集群中的某个节点启动网络连接。  例如: AutoSupport 、 SNMP 、时间同步和系统日志。配置节点管理接口并使其可用时、这些连接最好使用该接口。

当 Data ONTAP 联系 Active Directory 、 NIS 、 DNS 或 LDAP 等名称服务时,它倾向于从属于存储虚拟机( SVM )的数据或 SVM 管理接口启动这些连接。

虽然 Data ONTAP 倾向于使用这些类型的接口,但它将根据运行配置启动连接。  影响 IP 路由决策的一些因素包括:

  • 已配置的 IP 地址、 netmasks 和 routes
    Data ONTAP 节点可能托管许多网络接口、用于客户端访问、数据复制和系统管理。  配置多宿主网络主机时,请注意确保网络能够满足主机的通信需求。

  • SVM 名称服务配置
    集群模式 Data ONTAP ( CDOT )的早期版本允许数据 SVM 使用集群上配置的名称服务。  cDOT 8.3 及更高版本要求每个数据 SVM 使用其自己的名称服务配置。

  • IPspace 配置
    Data ONTAP 不会在 IPspace 之间路由网络流量。

  • 随着
    Data ONTAP 新增功能和改进功能的增加、 Data ONTAP 的发布、一些网络规则和功能也可能发生变化。  我们将这些更改记录在每个版本中;请参见下面的参考:

有关集群模式 Data ONTAP 配置的以太网存储设计注意事项和最佳实践,请参阅我们的 TR-4182

有关节点管理接口的备注:

在 Data ONTAP 8.x 7- 模式中、 E0 M 通常是节点管理界面。  集群模式 Data ONTAP 管理员可以在单独的端口上配置节点管理 LIF 。

节点的节点管理接口应配置在一个独立的 IP 子网上、与其他类型的流量(例如 数据、集群间和 SnapMirror )。在大多数配置中、节点管理接口应具有到其他主机(例如 syslog 、时间或邮件服务器)的路由。

 

Data ONTAP 不同版本的注意事项: 

  • 虽然 7- 模式 Data ONTAP 网络与 cDOT 不同,但它将使用类似的 IP 路由逻辑为网络流量选择源接口。
  • 在 cDOT 8.3 之前、集群节点可以从托管的任何 LIF 启动网络流量。
  • 从集群模式 Data ONTAP ( cDOT ) 8.3 开始,网络流量被隔离,这样 SVM 只能从自己的 LIF 启动连接。  对于枫树:数据 SVM 只能从其自身的数据或 SVM 管理 LIF 启动流量;作为管理 SVM 的一部分,节点本身不能从数据 SVM 的 LIF 启动流量。

  • 我们为 Data ONTAP 的每个版本发布网络管理指南: http://mysupport.netapp.com/documentation/productsato/index.html

其他信息

在此处添加您的文本。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.