跳转到主内容

常见问题解答:重新分配已配置的存储

Views:
37
Visibility:
Public
Votes:
0
Category:
data-ontap-8
Specialty:
core
Last Updated:

可不使用  

适用于

  • Data ONTAP

解答

  • 重新分配通过优化磁盘上的数据布局来优化顺序读取性能。
  • 它可以在卷、 LUN 、单个文件上运行、在特殊情况下可以聚合。
  • 可以使用重新分配命令从命令行界面( CLI )启动、停止、停止并计划重新分配过程。
  • 使用重新分配最容易产生的工作负载是随机写入后的顺序读取;但是,根据工作负载的特征,其他工作负载也可能会有所改善。
  • 相关链接:
  • 最佳实践
    • 目标卷上需要足够的空间。  
      • 要运行重新分配进程、目标卷上至少必须有 10% 的可用空间(不包括快照保留)才能进行块移动和重新定位。  
    • 对所使用的 ONTAP 版本运行相应的 "reallocate measure -o" 命令,以确定重新分配是否会获得最佳结果,从而为目标卷的数据访问提供所需的优势。 
    • 重新分配不会对快照中保留的块进行操作。  
      • 应在运行重新分配之前暂停计划的快照、以防止将任何受影响的块放置到快照保留中、 这可能会导致快照预留利用率超过其分配并开始使用活动文件系统、减少可用空间量并影响操作的整体结果。
    • 在重新分配之前尽可能多地删除快照,以获得最佳结果。  
    • 需要保留 SnapMirror 和 SnapVault 快照,以避免重新初始化相应的关系。 
    • 对于 SnapMirror 卷,只能在源卷上运行重新分配操作。
    • 应启用卷保证(厚配置)。  
      • 这样可以防止重新分配操作导致对卷的已分配空间过度订阅。
    • 请勿更改 WAFL 扫描速度设置以尝试提高重新分配过程的速度。  
      • 这样做会影响系统的整体性能。
    • 如果卷或卷容易发生导致动态变化和 / 或增长的操作,则最好安排将来的重新分配操作。 
    • 由于重新分配可能会占用大量资源,因此,请尽可能仅在利用率较低的时间内运行此操作,以避免因向目标卷发出写入请求而导致不必要的重复操作。  
      • 重新分配期间的并发写入请求过多会导致空间使用量发生原因过多。

可能的问题

  • 如果由于空间问题而导致卷范围内的完全重新分配失败、请尝试在可行的情况下按文件重新分配。
  • 无法对任何 SnapLock 卷执行重新分配,因为关联数据将标记为一次写入多次读取( Write Once Read Many , WORM ),并且在达到保留日期之前无法更改。  

其他信息

在此处添加您的文本。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.