跳转到主内容

ONTAP重新启动后、XL710 40GbE端口上出现CRC错误

Views:
32
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
CORE
Last Updated:

适用场景

  • ONTAP 9
  • 10/40千兆以太网控制器XL710网络端口
    • X91440A 以太网模块
    • X1144A 以太网网卡 (PCIe)
    • AFF A700s板载以太网端口
  • 前端 40G 交换机,例如 Cisco Nexus 或类似产品

问题描述

  • 存储系统具有连接到 40G 交换机(例如 Cisco Nexus 9336C-FX2)的 10/40 千兆以太网控制器 XL710 网络端口。
  • 在 ONTAP 重新启动或升级后,具有基于 XL710 的 40 千兆以太网集群端口的节点会报告集群网络降级事件。示例
[node1: vifmgr: callhome.clus.net.degraded:alert]: Call home for CLUSTER NETWORK DEGRADED: CRC Errors Detected - High CRC errors detected on port e8a node node1
[node1: vifmgr: vifmgr.cluscheck.hwerrors:alert]: Port e8a on node node1 is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped).
  • 40GbE 端口(用于集群或前端数据)在接收部分报告 CRC 错误ifstat命令。示例: 

::>system node run -node <node_name> -command ifstat e8a
-- interface e8a (0 hours, 5 minutes, 31 seconds) --
RECEIVE
Total frames: 23634 | Frames/second: 71 | Total bytes: 2019k
Bytes/second: 6100 | Total errors: 18292 | Errors/minute: 3316
Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 92
Non-primary u/c: 0 | CRC errors: 16978 | Runt frames: 0
Fragment: 0 | Long frames: 0 | Jabber: 1
Length errors: 0 | No buffer: 0 | Xon: 0
Xoff: 0 | Pause: 0 | Jumbo: 0
Noproto: 0 | Error symbol: 0 | Illegal symbol: 1313
Bus overruns: 0 | Queue drops: 0 | LRO segments: 20456
LRO bytes: 1707k | LRO6 segments: 0 | LRO6 bytes: 0
Bad UDP cksum: 0 | Bad UDP6 cksum: 0 | Bad TCP cksum: 0
Bad TCP6 cksum: 0 | Mcast v6 solicit: 0 | Lagg errors: 0
Lacp errors: 0 | Lacp PDU errors: 0

几小时/几天后

-- interface e8a (4 days, 3 hours, 24 minutes, 3 seconds) --
RECEIVE
Total frames: 19227k | Frames/second: 54 | Total bytes: 2006m
Bytes/second: 5607 | Total errors: 19949k | Errors/minute: 3345
Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 64901
Non-primary u/c: 0 | CRC errors: 18677k | Runt frames: 0
Fragment: 0 | Long frames: 0 | Jabber: 250
Length errors: 0 | No buffer: 0 | Xon: 0
Xoff: 0 | Pause: 0 | Jumbo: 0
Noproto: 0 | Error symbol: 0 | Illegal symbol: 1271k
Bus overruns: 0 | Queue drops: 0 | LRO segments: 17554k
LRO bytes: 1805m | LRO6 segments: 0 | LRO6 bytes: 0
Bad UDP cksum: 0 | Bad UDP6 cksum: 0 | Bad TCP cksum: 0
Bad TCP6 cksum: 0 | Mcast v6 solicit: 0 | Lagg errors: 0
Lacp errors: 0 | Lacp PDU errors: 0

  • 40GbE 端口链路可能会出现抖动或随后发生故障。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.