跳转到主内容

即使禁用了未使用的SAS端口、StorageBridgePortDown_Alert也会持续存在

Views:
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster<a>2009年497209</a>
Last Updated:

适用场景

  • ONTAP 9
  • ATTO 7500N网桥
  • 光纤连接 MetroCluster

问题描述

  • 由于未使用SAS端口、系统中报告了StorageBridgePortDown_Alert:

[Node-01: schmd: hm.alert.raised:alert]: Alert Id = StorageBridgePortDown_Alert , Alerting Resource = 220000XXXXXXXf80 raised by monitor system-connect

  • ATTO网桥上出现以下错误:

ATTO_ATTO_220000XXXXXXXf80(ATTO_220000XXXXXXXf80):SAS_PORT_2 is Offline.

  • 未使用的SAS端口将被禁用:

Cluster1::*> storage bridge run-cli -name ATTO_220000XXXXXXXf80 -command "SASPortList"
[Job 6284] Job is queued: Executing ATTO CLI command "SASPortList" on bridge "ATTO_220000XXXXXXXf80"..
Connector    PHY    Link       Speed   SAS Address
=============================================================
Device A      1      Up         12Gb  5001086000700d00
Device A      2      Up         12Gb   5001086000700d00
Device A      3      Up         12Gb   5001086000700d00
Device A      4      Up         12Gb   5001086000700d00
Device B      1     Disabled     12Gb   5001086000700d04
Device B      2     Disabled     12Gb   5001086000700d04
Device B      3     Disabled     12Gb   5001086000700d04
Device B      4     Disabled     12Gb   5001086000700d04

  • 即使在禁用未使用的SAS端口后、网桥也会报告错误:

Cluster1::*> storage bridge show
                    Is     Monitor Managed                        Is Bridge
Bridge           Symbolic Name Monitored Status  By    Vendor Model        Bridge WWN     Secure
------------------------ ------------- --------- ------- ------- ------ ------------------ ----------------  ---------
ATTO_220000XXXXXXXf80   ATTO-brg1
                    true    error  in-band Atto   FibreBridge 7500N  220000XXXXXXXf80   true

cluster1:::> storage bridge show ATTO_220000XXXXXXXf80

   Bridge Name: ATTO_220000XXXXXXXf80    
    Bridge WWN: 220000XXXXXXXf80
      Vendor: Atto
      Model: FibreBridge 7500N
  Serial Number: FB7500NXXXXXX
Firmware Version: 3.35 001L
  Management IP: 10.XX.XX.XX
      Errors: ATTO_ATTO_220000XXXXXXXf80(ATTO_220000XXXXXXXf80):SAS_PORT_2 is Offline.
Last Update Time: 4/3/2023 06:04:23 +00:00
Is Bridge Secure: false

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.