跳转到主内容

在两个配对站点上配置了 NetApp 聚合加密( NAE )和板载密钥管理器( OKM )后,无法创建初始 MetroCluster 配置

Views:
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
encryption
Last Updated:

适用场景

  • MetroCluster IP
  • NetApp 聚合加密( NAE )
  • 板载密钥管理器( OKM )

问题描述

无法创建初始 MetroCluster 配置,并显示以下错误消息:
 
ClusterA::*> metrocluster configure -node-name nodeA01

Error: command failed: MetroCluster cannot be configured while keymanager is configured on both partner sites. Disable  keymanager on one of the partner sites and then proceed with MetroCluster configuration. After successfully configuring MetroCluster, configure key manager on the partner site where it was disabled. If using onboard key manager, run the "security key-manager onboard sync" command on the partner site. Otherwise, if using external key manager, run the "security key-manager external enable" command on the partner site.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.