通过 100G MuxPonder 的长距离 ISL 不会形成中继

最后更新
另存为PDF

Views:: 2

Visibility:: Public

Votes:: 0

Category:: fabric-interconnect-and-management-switches

Specialty:: san

Last Updated:

适用场景

100 克 MuxPonder
Brocade 交换机
FCP
WDM

问题描述

通过 100G MuxPonder 的远程 ISL 不会在 Brocade 交换机中形成中继

admin> islshow
   1:  0-> 0 10:00:d8:1f:xx:xx:xx:xx   8 remote_switch  sp:  8.000G bw:  8.000G TRUNK CR_RECOV
   2:  1-> 1 10:00:d8:1f:xx:xx:xx:xx   8 remote_switch  sp:  8.000G bw:  8.000G TRUNK CR_RECOV

admin> trunkshow 1: 0-> 0 10:00:d8:1f:xx:xx:xx:xx 8 deskew 0 E-Port MASTER 2: 1-> 1 10:00:d8:1f:xx:xx:xx:xx 8 deskew 0 E-Port MASTER

admin> trunkdebug 0, 1 port 0 and 1 can't trunk due to one of the following reasons: ports are not same speed or valid speed ports are not same long distance mode local or remote ports are not in same port group difference between links length is greater than allowed

在正确形成的中继线上、输出类似于以下内容：

admin> trunkshow 1: 0-> 0 10:00:d8:1f:xx:xx:xx:xx 8 deskew 0 E-Port MASTER 1-> 1 10:00:d8:1f:xx:xx:xx:xx 8 deskew 0 E-Port