跳转到主内容

交换机重新启动后, ASUP 中会显示集群网络降级警报

适用场景

  • CN1610集群交换机
  • ONTAP 9
  • FAS/AFF

问题描述

  • CN1610交换机在断电或维护后重新启动。 
  • NetApp系统CLUSTER NETWORK DEGRADED 会在事件日志中报告以下警报:

[Node-01: vifmgr: callhome.clus.net.degraded:alert]: Call home for CLUSTER NETWORK DEGRADED: Total Packet Loss - Ping failures detected between Node-01_clus2 ( 169.XXX.XX.XXX ) on Node-01 and Node-04_clus1 ( 169.XXX.XX.XXX ) on Node-04

  • 如果使用ISL LAG (链路聚合)、您可能会看到此ASUP警报:(Health Monitor process cshm: SwitchIfIslDownWarn_Alert[<switch_name>/<LAG_name>]) ALERT
  • 在事件日志中:

[Node-04: cshmd: hm.alert.raised:alert]: Alert Id = SwitchIfIslDownWarn_Alert , Alerting Resource = cluster-sw1/ Link Aggregate 1 raised by monitor cluster-switch

  • 交换机运行状况已降级:

eu10380sc1::> system health subsystem show
Subsystem      Health
----------------- ------------------
SAS-connect     ok
Environment     ok
Memory          ok
Service-Processor ok
Switch-Health    degraded
CIFS-NDO      ok
Motherboard     ok
IO         ok
MetroCluster    ok
MetroCluster_Node ok
FHM-Switch     ok
FHM-Bridge     ok
SAS-connect_Cluster ok
13 entries were displayed.

  • 交换机show tech-support 报告ISL端口已禁用和关闭:

Switch# show port all

         Admin    Physical   Physical   Link   Link   LACP   Actor
Intf    Type   Mode    Mode     Status    Status Trap   Mode   Timeout
--------- ------ --------- ---------- ---------- ------ ------- ------ --------
0/13      PC Mbr Disable   10G Full              Down   Enable  Enable long
0/14      PC Mbr Disable   10G Full              Down   Enable  Enable long
0/15      PC Mbr Disable   10G Full              Down   Enable  Enable long
0/16      PC Mbr Disable   10G Full              Down   Enable  Enable long
  • show running-config在交换机的输出中、我们看到所有ISL端口均已关闭:

    interface 0/13
    shutdown
    description 'ISL member port 13'
    mtu 9216
    exit
    interface 0/14
    shutdown
    description 'ISL member port 14'
    mtu 9216
    exit
    interface 0/15
    shutdown
    description 'ISL member port 15'
    mtu 9216
    exit
    interface 0/16
    shutdown
    description 'ISL member port 16'
    mtu 9216
    exit

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device