跳转到主内容

报告 Cisco Nexus 交换机上的 Init 和 suspendByVPC 的端口

  1. 最后更新
  2. 另存为PDF
Views:
54
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
SAN
Last Updated:

适用场景

Cisco Nexus 5000 系列

问题描述

  • 端口报告 Init 和 suspendByV 状态，因此终端设备无法建立连接
Switch# show interface status 
Port     Name     Status     Vlan   Duplex  Speed     Type
Eth1/9     --     init         1     full     10G     10Gbase-SR
Eth1/10    --     connected    1     full     10G     10Gbase-SR
Eth1/11    --     suspndByV    1     full     10G     10Gbase-SR
Eth1/12    --     htStdbyIn    1     full     10G     10Gbase-SR
  • 端口已退回，但问题描述仍然存在
  • 将缆线移至下一个可用的交换机端以太网端口后，端口出现
  • 没有为现有端口通道配置配置新端口

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.