跳转到主内容

IO FPGA 无法在 Cisco Nexus 交换机上升级

Views:
12
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>FSE</a><a>2008712866</a>
Specialty:
hw
Last Updated:

适用场景

  • Cisco Nexus 3232C
  • Cisco Nexus 92300 YC
  • Cisco Nexus 9336C-x2

问题描述

在 " 适用场景 " 部分更新 交换机型号上的 EPLD 映像时, IO EPLD 设备会在设备正在对升级进行编程时显示;但是,重新启动后,设备不会显示更新后的版本。


switch1# install epld bootflash:n9000-epld.9.3.4.img module 1
Compatibility check:
Module Type Upgradable Impact Reason
------ ----------------- ---------- ---------- ------
 1 SUP Yes disruptive Module Upgradable
Retrieving EPLD versions.... Please wait.
Images will be upgraded according to following table:

Module  Type   EPLD             Running-Version   New-Version  Upg-Required
------  ----  -------------     ---------------   -----------  ------------
     1   SUP  MI FPGA                   0x9        0x12            Yes
     1   SUP  IO FPGA                   0x9        0x12            Yes


The above modules require upgrade.
The switch will be reloaded at the end of the upgrade
Do you want to continue (y/n) ? [n] y
Proceeding to upgrade Modules.
Starting Module 1 EPLD Upgrade

Module 1 : MI FPGA [Programming] : 100.00% (     64 of      64 sectors)
Module 1 : IO FPGA [Programming] : 100.00% (     64 of      64 sectors)
Module 1 EPLD upgrade is successful.
Module Type Upgrade-Result
------ ------------------ --------------
 1 SUP Success
Module 1 EPLD upgrade is successful.

重新启动后的输出:

switch1# show version module 1 epld
EPLD Device Version
---------------------------------------
MI FPGA 0x12
IO FPGA 0x9

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.