跳转到主内容

Nexus 9K交换机和分支缆线出现集群设置错误

  1. 最后更新
  2. 另存为PDF
Views:
4
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009323437</a>
Specialty:
hw
Last Updated:

适用场景

  • 初始化集群设置配置
  • Nexus N9K-C9336C-FX交换机、运行10.2 (3)、使用4根25 Gb分支缆线和RCF 1.8。

问题描述

  • 创建集群时的错误消息： 
Step 1 of 5: Create a Cluster
You can type "back", "exit", or "help" at any question.
Creating cluster
System start up Jan 01 00:01:00
[node_name-01:monitor.globalStatus.critical:EMERGENCY]: Controller failover of node_name-02 is not possible: Controller Failover takeover disabled.
Starting cluster support services Error: Not all local cluster ports have reachability to one another. Use the "network port reachability show -detail" command for more details. Resolve the issue, then try the command again.
  • ActiveIQ System Manager消息：
"The partner node details were not found for the node with the following serial number: 012345678910. If all the nodes were not found, then check the node connections, reload the cluster setup wizard, and then try to set up the cluster again."

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.