跳转到主内容

Cisco UCS FI 端口无法显示在 devicelogin -show 输出中

Views:
59
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用场景

  • Brocade 交换机
  • FOS 8.2.1
  • 映射
  • Cisco UCS FI

问题描述

  • 从 FOS 8.2.1 开始,交换机可以通过映射功能跟踪 Cisco UCS FI 端口以及每个端口上登录的 NPIV 设备数量。 
  • 此外,此功能还允许在 Cisco UCS FI 上行链路之间动态重新分布 NPIV 日志。有关重新平衡功能的工作原理的详细信息,请观看来自 Brocade -Brocade FOS 自动重新平衡 UCS NPIV 登录的 YouTube 视频
  • 使用此问题描述 时, FOS 无法识别 Cisco UCS FI 端口,这会通过运行命令限制 NPIV 重新平衡功能的功能  devicelogin --rebalance

示例:

在这种情况下,启动程序 /NPIV 的数量会在 4 个端口之间拆分,但在中仅列出 2 个端口 devicelogin --show

  • switchshow 在输出中, NPIV 设备按预期列出。

switch:admin>switchshow:
switchName:    switch

< 输出因简洁而被截断 >

Index Slot Port Address Media  Speed        State    Proto
============================================================

204    9   28   14cc00   id    N16      Online      FC  F-Port  1 N Port + 33 NPIV public
221   10   29   14dd00   id    N16      Online      FC  F-Port  1 N Port + 33 NPIV public 
284    4   44  149480   id    N16      Online      FC  F-Port  1 N Port + 32 NPIV public
267    3   43  148380   id    N16      Online      FC  F-Port  1 N Port + 33 NPIV public

  • devicelogin --show 在输出中,列出了端口 9/28 和 1029 ,但节点 WWN 20 : 01 : 00 : de : fb : B6 : 64 : C1 的 "Ports" 列下缺少端口 4/44 和 3/43

switch:admin> devicelogin --show
Node WWN                |State           |Ports Count |Ports (Number of devices) |
------------------------------------------------------------------------------------
20:01:00:de:fb:1f:0a:81 |BALANCED        |2           |6/27(50), 5/26(50)        |
20:01:00:de:fb:b6:64:c1 |BALANCED        |4           |9/28(34), 10/29(34)       |

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device