跳转到主内容

sensorreadingfailed 警报

Views:
20
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

适用于

  • NetApp Element 软件
  • NetApp H410s ( H300s 、 H500s 、 H700s )

问题

以下错误可能会出现在 ActiveIQ 中:

  • Error checking sensor for Inlet Temp (10193x)
  • Error checking sensor for FanX RPM (10193x)
  • 受影响节点 sudo 上的 /usr/bin 。 SMC - ipmicfg -sdr 将显示状态而不是 OK Fail status instead of OK
  • 可以从 mNode 运行的备用命令: sudo ipmitool -I lanplus -H <node-BMC-IP-address> -U <BMC-username> -P <BMC-password> sdr)


sfadmin@NODE /usr/bin $ sudo ./smc-ipmicfg -sdr
Status | (#)Sensor         |    Reading | Low Limit | High Limit |
------ | ---------         |    ------- | --------- | ---------- |
 Fail | (4) CPU1 Temp       |      N/A |     N/A |   98C/208F |
 Fail | (71) CPU2 Temp       |      N/A |     N/A |   98C/208F |
 Fail | (138) PCH Temp       |      N/A |   5C/41F |   95C/203F |
 Fail | (205) System Temp     |      N/A |   -5C/23F |   85C/185F |
  ---omitted---

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device