跳转到主内容

E系列新更换的驱动器在池配置中标记为未分配且缺失

Views:
15
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg<a>2008793647</a>
Last Updated:

适用场景

  • NetApp E 系列
  • NetApp StorageGRID设备
  • 11.50.3之前的NetApp SANtricity版本
  • NetApp SANtricity 11.60.2R1

问题描述

  • 更换故障驱动器后、新更换的驱动器将显示Unassigned、并且不会返回到磁盘池:

Status:                  Optimal
Mode:                    Unassigned

  • Recovery GURU 显示错误:

DISK_POOL_RECONSTRUCTION_DRIVE_COUNT_BELOW_THRESHOLD-Recovery Failure Type Code: 424
DISK_POOL_DRIVE_FAILURE-Recovery Failure Type Code: 443

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.