使用Fabric Pool的SVMDR无法初始化、并显示错误："不存在符合条件的聚合"

适用场景

• ONTAP 9.6及更高版本
• 使用FabricPool聚合的SVM DR

问题描述

• 尝试初始化SVM DR关系时、仅会创建部分卷级别关系
• 不会将两个卷复制到灾难恢复站点
• Last Transfer Error 在snapmirror show  命令的结果中显示错误

Failed to apply the source Vserver configuration. Reason: No eligible aggregate to place the volume. Make sure that a non-root, non-taken-over, non-snaplock aggregate with enough free space exists at the destination cluster. If aggr-list is configured for the Vserver make sure that an eligible aggregate is present in that list. Verify that the number of volumes is less than the supported maximum on the nodes in the destination cluster.
Failed to apply the source Vserver configuration. Reason: Apply failed for Object: volume Method: baseline. Reason: No eligible aggregate to place the volume. Make sure that a non-root, non-taken-over, non-snaplock aggregate with enough free space exists at the destination cluster. If aggr-list is configured for the Vserver make sure that an eligible aggregate is present in that list. Verify that the number of volumes is less than the supported maximum on the nodes in the destination cluster.
Execute "snapmirror show -destination-vserver svm-dr-og1 -fields last-transfer-error,unhealthy-reason -expand" to check if the constituent volumes have encountered errors.

• 在目标上检测到EMS事件vsdr.vol.nospaceinfabricpoolaggregate:error

[<NODE>: mgwd: vsdr.vol.nospaceinfabricpoolaggregate:error]: Couldn't place volume "<VOLUME>" of Vserver "<DESTINATION_SVM>" in fabric pool aggregate as there is not enough spece left in perf tier.