跳转到主内容

7 模式 SM 报告错误消息:无法连接到源存储系统

Views:
27
Visibility:
Public
Votes:
0
Category:
snapmirror
Specialty:
dp
Last Updated:

可不使用  

适用场景

产品型号: FAS3210-R5
操作系统: Data ONTAP 8.2.1 7- 模式
类别 2 : SnapMirror

本文适用于报告以下错误信息的任何 SnapMirror 案例:
cannot connect to source storage system

问题解答

此错误的所有已知原因都涉及名称解析或网络配置错误、特别是路由或防火墙。

名称解析

  1. 运行traceroute 命令以使用存储系统 ping 执行测试名称解析。即使该路径被阻止、名称解析也将起作用。
  2. 测试名称解析时,请确保输入的名称与 snapmirror/SnapVault 命令中输入的名称完全相同。
  3. 检查大写、拼写和 FQDN 。
  4. 运行getXXbyYY gethostbyname_r <hostname>命令检查 DNS 条目。
  5. 要确保主机名身份验证正确,请在/etc/hosts两端向中添加一个条目。
  6. 如果 ping 按预期方式解析但traceroute 未按预期方式解析,请验证末尾是否有空白行/etc/hosts

网络

追加信息

  • 您也可以进入 7- 模式存储器,转到选项 snapmirror.access 并确认访问已设置为 all 或 *
    • ::> options snapmirror.access all

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.