跳转到主内容

NDmpcopy失败、并显示错误消息Connection setup for transfer failed

Views:
6
Visibility:
Public
Votes:
0
Category:
ndmp<a>2009512832</a>
Specialty:
dp
Last Updated:

适用场景

  • ONTAP 9
  • NDMP

问题描述

  •  使用NDMPcopy将卷从一个集群复制到另一个集群失败、并显示错误消息""Ndmpcopy: Connection setup for transfer failed

Ndmpcopy: Starting copy [ 2 ] ...
Ndmpcopy: 10.0.xx.xx: Notify: Connection established
Ndmpcopy: 10.14.xxx.xxx: Notify: Connection established
Ndmpcopy: 10.0.xx.xx: Log: Session identifier: 63930
Ndmpcopy: 10.0.xx.xx: Log: The control connection is established on 10.0.xx.xx which is hosted on port e0M. This is a low bandwidth port and might impact performance.
Ndmpcopy: 10.0.xx.xx: Connect: Authentication successful
Ndmpcopy: 10.14.xxx.xxx: Connect: Authentication successful
Ndmpcopy: 10.14.xxx.xxx: Log: Session identifier: 62262
Ndmpcopy: Connection setup for transfer failed
Ndmpcopy: Done

  • 确保  preferred_interface_role 已将此选项配置为使用可成功与备份应用程序提供的二级存储设备IP地址通信的LIF角色类型。
  • 验证两个站点上的所有生命周期均已启动且正常运行。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.