跳转到主内容

Solaris 10 with ONTAP的建议设置是什么？

  1. 最后更新
  2. 另存为PDF
Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

适用场景

  • ONTAP 9.
  • Solaris 10

问题解答

[1] 与Solaris 11.x相比、Solaris 10的设置保持不变

追加信息

警告

注：HUK安装后、 需要重新启动主机、以确保相应地设置HBA参数。
 
  • 要完成安装、必须使用 host_config 命令为您的环境(此处为Oracle Solaris I/O多路径或MPxIO)配置主机参数。
  • 此 host_config 命令的格式如下：
/opt/NTAP/SANToolkit/bin/host_config ←setup>←protocol fcp|iscsi|mixed>←multipath mpxio|dmp| non> [-noalua] [-mcc 60|90|120]
 
  • 关于 host_config FC协议的setup命令， /opt/NTAP/SANToolkit/bin/host_config -setup -protocol fcp -multipath mpxio 是 需要在主机上运行的命令。
  • 除此之外、不 需要任何其他特定参数。
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.