更新ESXi和HBA驱动程序后、VM崩溃

最后更新
另存为PDF

Views:: 8

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: san<a>2009年354959</a>

Last Updated:

适用场景

ONTAP 9.3P19
VMware ESXi 7.0U3
HPE Synergy CNA 6820c

问题描述

ESXi从6.7升级到7.0U3、其中涉及到将HBA (HPE Synergy CNA 6820c)固件升级到8.55.31以及将驱动程序升级到2.2.70
VM崩溃
由于存储延迟较长、虚拟机性能下降
数据存储库可能会断开连接
vmkernel.log 指示读取(10)、重试：

ScsiDeviceIO: 4124: Cmd(0x45d9c8bba388) 0x28, CmdSN 0x17706 from world 2593788 to dev "naa.600a09803830377a4124496f41704874" failed H:0xc D:0x0 P:0x0

EMS 日志

fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:9c IO WQE failure, Handle 0xa, Type 8, S_ID: 1091C, VPI: 3, OX_ID: 282, Status 0x3 Ext_Status 0x1d fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:9c IO WQE failure, Handle 0xa, Type 8, S_ID: 1091C, VPI: 3, OX_ID: 25F, Status 0xc Ext_Status 0x0