通过 Emulex XE201 适配器看不到磁带库
适用场景
- ONTAP 9
- Emulex XE201
- Brocade 交换机
问题描述
连接到 Emulex XE201 适配器的磁带库不可见,无法用于备份:
sysconfig -A
在 NetApp 控制器中,显示 "?" 对于交换机端口:
slot 1: FC Host Adapter 1d (Emulex XE201 rev. 48, N-port, <UP>) Board name: 111-02451 Serial Number: FP95235984 Firmware rev: 12.0.378.1 Host Port Id: 0xdfc00 FC Node Name: 2:000:00109b:9xxxxx FC Port Name: 1:000:00109b:9xxxxx SFP Vendor: EMULEX SFP Part Number: AFBR-57F5MZ-ELX SFP Serial Number: AD1946J0CKC SFP Capabilities: 4, 8 or 16 Gbit Link Data Rate: 8 Gbit Switch Port: ?
- 对应
nsshow
Emulex HBA 端口的交换机名称服务器()中缺少 PortSymb
N 0dfc00; 3;10:00:00:10:9x:xx:xx:xx;20:00:00:10:9x:xx:xx:xx; 0x00000003
Fabric Port Name: 20:0f:50:eb:xx:xx:xx:xx
Permanent Port Name: 10:00:00:10:9x:xx:xx:xx
Port Index: 15
Share Area: Yes
Device Shared in Other AD: No
Redirect: No
Partial: No
LSAN: No
Device link speed: 8G
- 例如
nsshow
,不同适配器端口的预期输出:
N 17fc00; 3;10:00:00:10:9x:xx:xx:xx;20:00:00:10:9x:xx:xx:xx; 0x00000003 PortSymb: [41] "NetApp FC Storage Adapter NetApp1:1b." Fabric Port Name: 20:0f:50:eb:xx:xx:xx:xx Permanent Port Name: 10:00:00:10:9x:xx:xx:xx Port Index: 15 Share Area: Yes Device Shared in Other AD: No Redirect: No Partial: No LSAN: No Device link speed: 8G