跳转到主内容

OpenShift Pod报告路径失败

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san<a>201008708.</a>
Last Updated:

适用场景

  • ONTAP 9.
  •  在OpenShift Pod中运行的RHEL操作系统

问题描述

  • LUN由OpenStack Cinder驱动程序配置。
  • LUN和卷均处于联机状态。
  • LUN已映射、并且LIF已启动/启动
  • RHEL主机上显示以下多路径状态

3600a098038314977385d55755767xx 47dm-0 NETAPP,LUN C-Mode
size=200Gfeatures='2 pg_init_retries 50' hwhandler='1 alua' wp=rw
`-+-policy='service-time 0' prio=0 status=enabled
 |- 3:0:0:0   sdb  8:16   failed faulty running
 `- 7:0:0:0   sdc  8:32   failed faulty running

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.