跳转到主内容

连接到8G交换机后、FC启动程序端口脱机

Views:
35
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

适用场景

  • ONTAP 9.15.1及更高版本
  • FC启动程序端口
  • QLogic 28xx
  • 8 G FC交换机

问题描述

  • 启动程序端口无法联机:
[FAS2820CLR-01: isp2400_asyncd_1: fci.adapter.online.failed:error]: Fibre Channel adapter 1a failed to come online.
  • 端口为OFFLINE (hard)
slot 1: FC Host Adapter 1a (QLogic 2812 rev. 2, L-port, <OFFLINE (hard)>)
Board name:     110-00763
Serial Number:   042417030463
Firmware rev:    9.11.0
Host Loop Id:    0
FC Node Name:    5:00a:09800e:cbbfd5
FC Port Name:    5:00a:09820e:cbbfd5
SFP Vendor:     FINISAR CORP.
SFP Part Number:  FTLF8532P4BCV-N1
SFP Serial Number: P8SBKH5
SFP Capabilities:  8, 16 or 32 Gbit
Link Data Rate:   N/A
  • 交换机端口处于No_Sync 状态

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?