跳转到主内容

由于交换机端SFP出现故障、主机上发出中止命令

Views:
186
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

适用场景

  • ONTAP 9
  • FCP
  • Brocade FC 交换机
  • Oracle Linux服务器

问题描述

  • 发出命令的Oracle Linux服务器会被abs:
kernel: qla2xxx [0000:3b:00.1]-801c:2: Abort command issued (rc 0) nexus=2:3:20 -- 2002
  • EMS日志会在连接到一个网络结构的适配器上显示无序帧(Ext_Status 0x1d )和超时(Ext_Status 0x16 ):
STIO Adapter:2b IO WQE failure, Handle 0x1, Type 8, S_ID: 110700, VPI: 277, OX_ID: 60B, Status 0x3 Ext_Status 0x16
STIO Adapter:2d IO WQE failure, Handle 0x3, Type 8, S_ID: 190200, VPI: 278, OX_ID: 1AF4, Status 0x3 Ext_Status 0x1d
STIO Adapter:2b IO WQE failure, Handle 0x1, Type 8, S_ID: 112300, VPI: 277, OX_ID: DF, Status 0x3 Ext_Status 0x16
  • errdump 的存储连接交换机在ISL上显示到主机连接交换机的帧超时:
2025/04/18-02:46:39, [AN-1014], 2419, FID 128, INFO, IT3-G39-FCB6K-01, Frame timeout detected, tx port 42 rx port 2, sid 150209, did 112b00, timestamp 2025-04-18 02:46:39 .
2025/04/18-02:46:39, [AN-1014], 2432, FID 128, INFO, IT3-G39-FCB6K-01, Frame timeout detected, tx port 42 rx port 7, sid 150706, did 111f00, timestamp 2025-04-18 02:46:39 .
2025/04/18-02:46:39, [AN-1014], 2438, FID 128, INFO, IT3-G39-FCB6K-01, Frame timeout detected, tx port 42 rx port 9, sid 1f0200, did 110b06, timestamp 2025-04-18 02:46:39 .
  • 主机连接的交换机会在连接到受影响服务器的端口上显示链路重置:
2025/04/22-01:52:05, [C3-1014], 1937, CHASSIS, WARNING, DL_6510,  Link Reset on Port S0,P43(25) vc_no=0 crd(s)lost=12 auto trigger.
2025/04/22-03:54:15, [C3-1014], 1939, CHASSIS, WARNING, DL_6510,  Link Reset on Port S0,P43(25) vc_no=0 crd(s)lost=12 auto trigger.
2025/04/22-04:44:18, [C3-1014], 1940, CHASSIS, WARNING, DL_6510,  Link Reset on Port S0,P43(25) vc_no=0 crd(s)lost=12 auto trigger.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.