跳转到主内容

无法在SVM-DR故障转移后挂载NFS卷

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas<a>2010036853</a>
Last Updated:

适用场景

  • ONTAP 9.
  • NFS

问题描述

  • 用户无法在SVM-DR故障转移后挂载。
  • 由于添加了用于POST svmdr.访问的占位符、导出策略已更改

cluster1::*> export-policy check-access -vserver svm1 -volume vol1 -client-ip 1.1.1.1 -authentication-method sys -protocol nfs3 -access-type read-write
                     Policy   Policy     Rule
Path              Policy    Owner    Owner Type  Index Access
----------------------------- ---------- --------- ---------- ------ ----------
/                default   njcnfsibspr01_root
                          volume      1 read

Error: show failed on vserver "svm1" volume "vol1" client-ip "1.1.1.1" authentication-method "sys" protocol "nfs3" access-type "read-write": Failed to check exports for Vserver "svm1". The command returned an error when evaluating an entry in the client match "svm_placeholder" for rule at index "1" in export policy "policy1". Error code: 7208(a name lookup failed in mgwd). The
    problem appears to be in the name service configuration for the client match specified in the rule. Wait for a few seconds, and then try the command again. If this error persists, contact technical support personnel for assistance.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.