SFP28 端口 IFGRP 和 VLAN 速度不准确
适用于
- AFF-A400
- 小型可插拔 28 ( SFP28 )
- NetApp ONTAP System Manager ( OCSM )
问题
- 如果具有两个 SFP28 端口的创建接口组( IFGRP )未通过 CLI 命令显示速度,并且 OCSM 仅显示 40 GB 速度,而不是 50 GB 速度。
示例:
stiA700-2211593634077::> network port show
Node: stiA700-221
Speed(Mbps) Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------ ---------------- ---- ---- ----------- --------
a0a Default Default up 1500 -/- healthy
e0M Default mgmt_bd_1500 up 1500 auto/1000 healthy
e4a Cluster Cluster up 9000 auto/40000 healthy
e4e Cluster Cluster up 9000 auto/40000 healthy
e9a Default - up 1500 auto/10000 healthy
e9b Default - up 1500 auto/10000 healthy
e9c Default Default up 1500 auto/10000 healthy
e9d Default Default up 1500 auto/10000 healthy
stiA700-2211593634077::> ifgrp show
Port Distribution Active
Node IfGrp Function MAC Address Ports Ports
-------- ---------- ------------ ----------------- ------- -------------------
stiA700-221
a0a ip 02:a0:98:ef:4c:7e full e9a, e9b
- 创建具有四个 SFP28 端口的 IFGRP 时, OCSM 中显示 100 GB ,虚拟 LAN ( VLAN )也显示 100 GB ,在重置 phy 端口后, VLAN 速度将变为 40 GB 而不是 100 GB 。
示例: