跳转到主内容

在互连端口e0b上检测到多个TCP数据包校验和错误

Views:
5
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
nas<a>2009930998</a>
Last Updated:

适用场景

  • AF-C800
  • 9.13.1P6.

问题描述

  • e0b EMS日志的互连端口上检测到校验和错误的多个TCP数据包。 

1/31/2024 15:53:57  node-B   ERROR     netif.tcp.conn.bad.checksum: TCP packet with bad checksum detected on port e0b. The packet arrived on connection with source address 111.222.33.444 and destination_address 555.666.77.888.
1/31/2024 14:53:09  node-B   ERROR     netif.tcp.conn.bad.checksum: TCP packet with bad checksum detected on port e0b. The packet arrived on connection with source address 111.222.33.444 and destination_address 555.666.77.888.
1/31/2024 13:51:06  node-B   ERROR     netif.tcp.conn.bad.checksum: TCP packet with bad checksum detected on port e0b. The packet arrived on connection with source address 111.222.33.444 and destination_address 555.666.77.888.
1/31/2024 12:50:59  node-B   ERROR     netif.tcp.conn.bad.checksum: TCP packet with bad checksum detected on port e0b. The packet arrived on connection with source address 111.222.33.444 and destination_address 555.666.77.888.
1/31/2024 11:45:00  node-B   ERROR     netif.tcp.conn.bad.checksum: TCP packet with bad checksum detected on port e0b. The packet arrived on connection with source address 111.222.33.444 and destination_address 555.666.77.888.

  • 没有 CRC errors 计数 IFSTAT -Anode-B 遇到与相关的接收到错误 Bad TCP checksum。 

Node: node-B

-- interface  e0b  (3 hours, 7 minutes, 36 seconds) --

RECEIVE
 Total frames:    2568k | Frames/second:    228  | Total bytes:     511m
 Bytes/second:   45400  | Total errors:     0  | Errors/minute:     0
 Total discards:    0  | Discards/minute:    0  | Multi/broadcast: 11619
 Non-primary u/c:   78  | CRC errors:      0 | Long frames:      0
 Jabber:        0  | Length errors:     0  | No buffer:       0
 Pause:         0  | Jumbo:       35893  | Error symbol:     0
 Bus overruns:     0  | LRO segments:    256  | LRO bytes:      104k
 LRO6 segments:     0  | LRO6 bytes:      0  | Bad UDP cksum:    67
 Bad UDP6 cksum:    0  | Bad TCP cksum:    178 | Bad TCP6 cksum:    0
 Mcast v6 solicit:   0  | Lagg errors:      0  | Lacp errors:      0
 Lacp PDU errors:    0
TRANSMIT
 Total frames:    3221k | Frames/second:    286  | Total bytes:     507m
 Bytes/second:   45084  | Total errors:     0  | Errors/minute:     0
 Total discards:    0  | Queue overflow:    0  | Multi/broadcast: 11618
 Collisions:      0  | Pause:         0  | Jumbo:       34510
 Cfg Up to Downs:    1  | TSO segments:     0  | TSO bytes:       0
 TSO6 segments:     0  | TSO6 bytes:      0  | HW UDP cksums:   11244
 HW UDP6 cksums:    0  | HW TCP cksums:     0  | HW TCP6 cksums:    0
 Mcast v6 solicit:   0  | Lagg drops:      0  | Lagg no buffer:    0
 Lagg no entries:    0
DEVICE
 Mcast addresses:    6  | Rx MBuf Sz:     4096
LINK INFO
 Speed:        100G | Duplex:       full | Flowcontrol:     full
 Media state:    active | Up to downs:      1 | HW assist:     5655

  • 更换  e0b 两个互连端口上连接的铜缆、但问题未解决。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.