由于缺少已发现的设备接口、一个节点上的LACP端口出现闪烁

最后更新
另存为PDF

Views:: 3

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: nas

Last Updated:

适用场景

ONTAP 9
LACP

问题描述

根据以下EMS日志、一个节点上的LACP端口轻拍。

Thu Aug 08 09:13:56 +1000 [Node-01: intr: net.ifgrp.lacp.link.active:notice]: ifgrp a0a, port e0f has transitioned to the active state. Thu Aug 08 09:15:20 +1000 [Node-01: intr: net.ifgrp.lacp.link.inactive:error]: ifgrp a0a, port e0f has transitioned to an inactive state. The interface group is in a degraded state. Thu Aug 08 09:18:12 +1000 [Node-01: intr: net.ifgrp.lacp.link.active:notice]: ifgrp a0a, port e0f has transitioned to the active state. Thu Aug 08 09:21:05 +1000 [Node-01: intr: net.ifgrp.lacp.link.inactive:error]: ifgrp a0a, port e0f has transitioned to an inactive state. The interface group is in a degraded state.

所有ifgroup和物理端口均已启动且运行正常。
有关端口的ifstat没有错误。
根据ifconfig -vv输出、ONTAP上的LACP端口配置正确。
交换机端的LACP配置也正确。
network device-discovery show 输出显示未将任何邻居设备连接到相关端口

cluster::> network device-discovery show

Node/ Local Discovered Protocol Port Device Interface Platform ----------- ------ ---------------- ---------------- Node-01 e0c 192.9x.9.2xx GigabitEthernet1/0/21 Node-01 e0d 192.9x.9.2xx GigabitEthernet1/0/22 Node-01 e0e 192.9x.9.2xx GigabitEthernet1/0/23 Node-01 e0f <<<<<<<<<<<<