以太网端口上的 CRC 错误增加

• ONTAP 在事件日志中报告以下消息：

Thu Jul 08 00:17:37 PDT [node1: vifmgr: vifmgr.cluscheck.crcerrors:alert]: Port e0d on node node1 is reporting a high number of observed hardware errors, possibly CRC errors.

• Ifstat 输出显示片段错误计数器增加。

cluster1::> system node run node1 -command ifstat e0d

RECEIVE
 Total frames:    2050k | Frames/second:     5  | Total bytes:     427m
 Bytes/second:    1033  | Total errors:    1185  | Errors/minute:     0
 Total discards:    0  | Discards/minute:    0  | Multi/broadcast:   599k
 Non-primary u/c:    0  | Errored frames:    0  | Unsupported Op:    0
 CRC errors:     1185  | Runt frames:      0  | Fragment:       0
 Long frames:      0  | Jabber:        0  | Length errors:     0
 Alignment errors:   0  | No buffer:       0  | Pause:         0
 Jumbo:         5  | Error symbol:     0  | Bus overruns:     0
 Queue drops:      0  | LRO segments:    1391k | LRO bytes:      367m
 LRO6 segments:     0  | LRO6 bytes:      0  | Bad UDP cksum:     0
 Bad UDP6 cksum:    0  | Bad TCP cksum:     0  | Bad TCP6 cksum:    0
 Mcast v6 solicit:   0  | Lagg errors:     0  | Lacp errors:      0