跳转到主内容

如何证明通过本机VLAN发送的CFM帧在网络上被丢弃

  1. 最后更新
  2. 另存为PDF
Views:
7
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
NAS
Last Updated:

适用场景

  • ONTAP 9
  • L2可接地
  • 连接故障管理(CFM)

问题描述

  • 升级到ONTAP 9.131后、由于交换机上不允许CFM帧导致L2可访问性问题、本机VLAN端口显示已降级。
  • 此 操作步骤 用于确认CFM帧是否被交换机丢弃

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.