跳转到主内容

接管和交还后运行状况警报:"存储架未连接到HA对的两个控制器"

Views:
5
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core<a>2010097337</a>
Last Updated:

适用场景

ONTAP 9

问题描述

  • 在接管和恢复操作后、`ssystem运行状况警报show`命令会输出以下警报:

::*> system health alert show
               Node: xxxxxx
           Resource: Shelf 1.1
           Severity: Major
    Indication Time: Tue Jul 16 14:31:50 2024
           Suppress: false
        Acknowledge: false
     Probable Cause: Storage shelf 1.1 is not connected to both controllers
                     of the HA pair (xxxxxx, xxxxxx).
    Possible Effect: Access to shelf 1.1 will be lost with a single
                     controller failure.
 Corrective Actions: 1. Halt all controllers that are connected to shelf 1.1.
                     2. Connect shelf 1.1 to both HA controllers following the guide applicable to your shelf.
                     3. Reboot the halted controllers.
  • 经过一段时间(几分钟)后、此错误将得以解决、并且系统运行状况警报表为空:

::*> system health alert show
This table is currently empty.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.