跳转到主内容

对于IP为xx.xx.xx.127的DNS服务器、DNS创建和PREFDC添加失败、并显示错误"网络无法访问"

Views:
12
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas<a>2009年228034</a>
Last Updated:

适用场景

  • ONTAP 9
  • IP地址以x.x.x.127结尾的DNS服务器

问题描述

  • DNS创建失败

cluster::> dns create -vserver svm1 -domains naslab.local -name-servers xx.xx.xx.127,xx.xx.xx.190,xx.xx.xx.191
Error: Failed to verify the specified DNS configuration.
       xx.xx.xx.127: Network is unreachable.
       xx.xx.xx.190: Server is reachable.
       xx.xx.xx.191: Server is reachable.
       command failed: Verify that the network configuration is correct and that DNS servers are available. Specify "-skip-config-validation" to skip the configuration validation.

  • DNS检查失败(如果  已运行带有-skipp-config-validation的DNS创建)

cluster::> dns check -vserver svm1
                Name Server
Vserver     Name Server    Status     Status Details
------------- --------------- ------------ --------------------------
svm1      xx.xx.xx.127   down      Network is unreachable.
svm1      xx.xx.xx.190   up       Response time (msec): 100
svm1      xx.xx.xx.191   up       Response time (msec): 1
3 entries were displayed.

  • PREFDC添加失败 

cluster::*> vserver  cifs domain preferred-dc add -vserver svm1 -domain naslab.local xx.xx.xx.127,xx.xx.xx.190,xx.xx.xx.191
Error: command failed: Invalid domain controller xx.xx.xx.127

  • 集群管理LIF位于Node-01上

cluster::> net int show -vserver cluster -role cluster-mgmt
       Logical   Status    Network       Current     Current Is
Vserver    Interface  Admin/Oper Address/Mask     Node      Port   Home
----------- ---------- ---------- ------------------ ------------- ------- ----
cluster
      cluster_mgmt up/up   10.xx.xx.35/24    node-01 e0a  true

  • SVM CIFS数据LIF位于Node-02上

cluster::> net int show -vserver svm1
       Logical   Status    Network       Current     Current Is
Vserver    Interface  Admin/Oper Address/Mask     Node      Port   Home
----------- ---------- ---------- ------------------ ------------- ------- ----
svm1
      lif1     up/up   10.61.83.34/24   node-02 e0a  true

  • 通过集群管理LIF向集群发送SSH 

cluster::> node run local hostname
node-01

注意: 在运行 dns create 或 prefdc add 使用N节点02管理LIF登录到集群时、不会显示此问题描述。 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.