REST API命令(statistics.device.receive_raw.errors)?)发出的返回值是多少
适用场景
ONTAP 9
问题解答
- REST API命令
statistics.device.receive_raw.errors()发出的返回值为接收错误。 - 如下面的示例所示，它是从总错误中获取的：下
RECEIVE。 - 总错误数表示接口上发生的总错误数。
输出示例
cluster::> system node run -node node_example> -command ifstat XXX
-- interface XXX (214 days, 22 hours, 50 minutes, 27 seconds) --
RECEIVE ＜＜★
Total frames: 0 | Frames/second: 0 | Total bytes: 0
Bytes/second: 0 | Total errors:＜＜★ 0 | Errors/minute: 0
Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 0
Non-primary u/c: 0 | CRC errors: 0 | Runt frames: 0
Fragment: 0 | Long frames: 0 | Jabber: 0
Length errors: 0 | No buffer: 0 | Xon: 0
Xoff: 0 | Pause: 0 | Jumbo: 0
Noproto: 0 | Error symbol: 0 | Illegal symbol: 0
Bus overruns: 0 | Queue drops: 0 | LRO segments: 0
LRO bytes: 0 | LRO6 segments: 0 | LRO6 bytes: 0
Bad UDP cksum: 0 | Bad UDP6 cksum: 0 | Bad TCP cksum: 0
Bad TCP6 cksum: 0 | Mcast v6 solicit: 0 | Lagg errors: 0
Lacp errors: 0 | Lacp PDU errors: 0
TRANSMIT
Total frames: 0 | Frames/second: 0 | Total bytes: 0
Bytes/second: 0 | Total errors: 0 | Errors/minute: 0
Total discards: 0 | Queue overflow: 0 | Multi/broadcast: 0
Collisions: 0 | Xon: 0 | Xoff: 0
Pause: 0 | Jumbo: 0 | Cfg Up to Downs: 0
TSO non-TCP drop: 0 | Split hdr drop: 0 | Timeout: 0
TSO segments: 0 | TSO bytes: 0 | TSO6 segments: 0
TSO6 bytes: 0 | HW UDP cksums: 0 | HW UDP6 cksums: 0
HW TCP cksums: 0 | HW TCP6 cksums: 0 | Mcast v6 solicit: 0
Lagg drops: 0 | Lagg no buffer: 0 | Lagg no entries: 0
DEVICE
Mcast addresses: 1 | Rx MBuf Sz: 4096
LINK INFO
Speed: 0 | Duplex: full | Flowcontrol: full
Media state: no carrier | Up to downs: 0 | HW assist: 7711追加信息
其他信息文本