“忽略不一致设置”为“开”意味着什么？

适用于

• Data ONTAP 7 及更早版本
• Data ONTAP 8
• ONTAP 9

解答

• 如果将此值设置为 on 、 Data ONTAP 将忽略存在或可能出现的任何文件系统不一致性。
• 如果设置为 On （开），请联系 NetApp 技术支持以解决此问题。
• 如果这会影响您的系统，请检查 Active IQ
• 要通过 CLI 进行检查，请运行以下命令：

::>storage aggregate show -aggregate <aggr>

• 示例：

filer::> storage aggregate show -aggregate aggr0

                                         Aggregate: aggr0
                                    Checksum Style: block
                                   Number Of Disks: 3
                                            Mirror: false
                                              Node: filer
                              Disks for First Plex: 1.21.0, 1.21.1, 1.21.3
                           Disks for Mirrored Plex: -
                         Partitions for First Plex: -
                      partitions for Mirrored Plex: -
                           Free Space Reallocation: off
                                         HA Policy: cfo
                               Ignore Inconsistent: on
                Space Reserved for Snapshot Copies: 5%
           Aggregate Nearly Full Threshold Percent: 97%
                  Aggregate Full Threshold Percent: 98%
                         Block Checksum Protection: on

其他信息

对于以 7 模式运行的 Data ONTAP ，请运行 aggr status命令检查状态。