跳转到主内容

boot_ontap maint 与 boot_diags 有何区别？

  1. 最后更新
  2. 另存为PDF
Views:
60
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

适用场景

ONTAP 9

问题解答

虽然这两个工具集相似、但它们运行两个不同的内核、每个内核都用于执行特定的任务子集

命令 它的用途
boot_ONTAP维护
  • 与从启动菜单运行选项'5'相同
  • 仅用于运行维护模式下的配置更改命令、例如"ha-config modify"、"ucadmin modify"或"isk reassign"。写入新配置的任何维护命令都应从此内核运行
boot_diags
  • 为了运行"ldiags"、我们的内置硬件测试软件可在现场更换FRU设备后对其进行测试
  • 可用于在发出"ldiags"命令之前、在维护模式下运行"shl"命令
    • 'ucadmin show'、'storage show disk -p '、'isk show'等。
  • 不应与在维护模式下修改节点配置的任何命令结合使用

追加信息

《ONTAP硬件系统级诊断解决方案指南》

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.