卷移动作业挂起、未找到作业详细信息
适用场景
- SnapLock
- ONTAP
问题描述
volume moving命令会显示vol moving已处于活动
volume move show
状态、并使用""命令查看正在进行的移动操作的状态。- 即使在15分钟后、卷移动仍显示挂起且无进度:
Cluster102::> vol move show
Vserver Volume State Move Phase Percent-Complete Time-To-Complete
--------- ---------- -------- ---------- ---------------- ----------------
SVM1 auto_vol - - - -
SVM1 vol_gpl_pdm - - - -
- 如果卷移动挂起、中止命令将失败。
Cluster102::> volume move abort -volume auto_vol -vserver SVM1
Error: command failed: Failed to lookup job id for volume move job UUID: 5b2bea68-6040-11ed-bb71-00a098ba00f8.
实例输出将突出显示的值显示为空白。
::>vol move show -volume auto_vol -instance
Vserver Name: SVM1
Volume Name: auto_vol
Actual Completion Time: -
Bytes Remaining: -
Destination Aggregate: aggr_sas01
Detailed Status: Cannot get information for job (id 74) "Move "auto_vol" in Vserver "SVM1" to aggregate "aggr_sas01"". Not found
Estimated Time of Completion: -
Managing Node: -
Percentage Complete: -
Move Phase: -
Estimated Remaining Duration: -
Replication Throughput: -
Duration of Move: -
Source Aggregate: aggr_sas02
Start Time of Move: -
Move State: -
Is Source Volume Encrypted: false
Encryption Key ID of Source Volume:
Is Destination Volume Encrypted: false
Encryption Key ID of Destination Volume: -